The beech wood rungs, with a diameter of 38 mm, are intentionally less ergonomic to make grip training more challenging and effective.

The “Pro” suffix identifies an advanced version compared to traditional all-wood models. To ensure high-quality standards, especially for professional use, our wooden models, such as the 9100 and 9099, are handcrafted in the factory. This process guarantees precise fits and gluing but has some limitations: transporting the product fully assembled results in higher logistical costs, positioning difficulties, and increased risk of damage.

With the Functional Wall Bars 9102, we have overcome these challenges by offering a high-quality wall bar that can be assembled on-site without compromising structural integrity. The metal uprights, laser-cut with precision, ensure a safe and stable assembly directly at the user’s location.

Installation Guidelines and Precautions:

• To facilitate transport and positioning, the wall bar is delivered with its main components disassembled. The assembly process is simple and intuitive, ensuring quick and secure installation.
• Wall mounting, although straightforward, must be performed by a professional technician who will assess the wall type, its condition, and, most importantly, its thickness to determine the appropriate anchor length. Generally, 4 anchors with M10 screws (100 mm + additional length for wall anchoring) can be used. The anchor must support a load of 300 kg for the upper fixings and 150 kg for the lower fixings.
• Anchors are not included with the 9102 model.
• The 9102 wall bar does not require L-brackets for mounting, as the uprights are pre-drilled to accommodate wall anchors.
• Floor support: It is essential that the base of the wall bar rests on the floor so that the wall anchors function primarily as anti-tilt supports rather than bearing the entire weight of the equipment and user.

Dimensions: 920 x 2250 mm
Weight: 38 kg
Maximum load: 110 kg

L'articolo 9102 Functional Wall Bars Pro proviene da Isla Fit Canarias.

To ensure high-quality standards, especially for professional use, our wooden models, such as the 9100 and 9099, are fully assembled in the factory. This artisanal process guarantees precise fits and bonds but requires the product to be transported as a single unit, leading to higher costs, positioning challenges, and increased risk of damage.

With the Wall Bars 9101, we have developed a high-quality wall bar that retains the finely finished oval rungs while allowing on-site assembly without compromising structural strength. The metal uprights, crafted with laser technology, ensure safe and sturdy assembly directly at the user’s location.

Installation Guidelines and Precautions:

• To facilitate transport and positioning, the wall bar is delivered with its main components disassembled. The assembly process is simple and intuitive, allowing for quick and secure installation.
• Wall mounting, although straightforward, must be carried out by a professional technician who will assess the wall type, condition, and most importantly, its thickness to determine the required anchor length. Generally, four anchors with M10 screws (100 mm + additional length for wall anchoring) can be used. The anchors must support a load of 300 kg for the upper fixings and 150 kg for the lower fixings.
• Anchors are not included with the 9101 model.
• The 9101 wall bar does not require L-brackets for installation, as the uprights are pre-drilled to accommodate wall anchors.
• Floor support: It is essential that the base of the wall bar rests on the floor so that the wall anchors function primarily as anti-tilt supports rather than bearing the entire weight of the equipment and user.

Dimensions: 990 x 2410 mm
Weight: 35 kg
Maximum load: 110 kg

L'articolo 9101 Wall Bars Pro proviene da Isla Fit Canarias.

The Multi-Grip Pull Up Bar allows the widest possibility to vary the type of grip, making one of the most complete exercises for strength even more complete. Prone or supine grip, with different angles and possibility to change the distance between the hands, are facilitated by the structure of the tool.

Possible grips and hands positions on the bar:

Connection hole diameter 13 mm

See also:
code 9048/2 Multi-Grip Bar

L'articolo 9048/2A Multi Grip Bar – only bar proviene da Isla Fit Canarias.

L'articolo 9048/1B Upright for Pull Up Bar 110cm proviene da Isla Fit Canarias.

Lenght 1100 mm, Ø 33 mm bar
Weight 4 kg
Max. load 300 kg
Connection holes diameter : 13mm

L'articolo 9048/1A Pull Up Bar 110cm proviene da Isla Fit Canarias.

The Multi-Grip Pull Up Bar allows the widest possibility to vary the type of grip, making one of the most complete exercises for strength even more complete. Prone or supine grip, with different angles and possibility to change the distance between the hands, are facilitated by the structure of the tool.

Possible grips and hands positions on the bar:

The Multi-Grip Pull Up Bar code 9048/2 is mounted to the wall with a depth of 90 cm and uses the same triangular brackets as the Pull Up Bar code 9048/1, which makes interchangeable the two bars on the same brackets. Both tools can be used as an attachment point for suspension training equipment such as Flying code 2092, Rings code 2088 or Abdominal Suspension Bands code 2094.

WALL FIXING SCREWS NOT INCLUDED

Dimensions: 1232 x 904 mm, Ø 33 mm bar
Weight: 16 Kg
Maximum load capacity: 300 kg
Anchor Hole Diameter Size: 12 mm

WARNING:
WALL MOUNTING: For the mounting, it is always necessary to rely on a professional technician who assesses the type of wall, its thickness, and its specific state. A general indication for a reinforced concrete wall is to use nr. 6 dowels with an M8 screw. These fixing plugs are not supplied by Sidea.

🇮🇹 Versione italiana

L'articolo 9048/2 Multi Grip Bar – Multi-Grip Pull Up Bar proviene da Isla Fit Canarias.

Powder Chalk – Magnesium carbonate. Commonly called magnesite, from the mineral from which it derives, the magnesium carbonate is mainly used on the hands to dry sweat and increase grip. The powder solution, not diluted in alcohol, is the most effective and affordable, especially if required for different parts of the body or on tools: hands, feet, neck, axillary areas, rings, bars, barbells.
Bag of 450 g.

Powder Chalk – Available models:
cod. 1101 Powder Chalk – 450 g
cod. 1102 Block Chalk – 450 g x 8 block
cod. 1103 Liquid Chalk – bottle

🇮🇹 Versione Italiana

L'articolo 1101 Powder Chalk proviene da Isla Fit Canarias.

1707 Weight-Lifting Belt Line

The 1707 Weight-Lifting Belt line is designed for high-intensity weight-lifting training—ideal for athletes seeking to improve core stability and overall performance. It offers an effective increase in intra-abdominal pressure while ensuring excellent freedom of movement and optimal fit, meaning the belt adapts well to the waist while maintaining sufficient rigidity.

For this reason, the belt is narrow, with a consistent height of 10 cm along its length, an 8 mm thickness, and a thin lumbar padding (~15 mm), bringing the total thickness to 23 mm. Secure fastening and quick removal are ensured by a chrome-plated steel buckle with a single prong and oval holes. The belt is finished with double polyester stitching.

The waist size is determined by measuring the circumference at the narrowest point of the torso, just above the iliac crests.
For example, an athlete with a 90 cm waist would choose size L, which, as indicated in the table, is suitable for waist measurements under 95 cm.

Weight-Lifting Belt – Available Sizes:

Cod. 1707/75 – XS:
Waist less than 65 cm

Cod. 1707/85 – S:
Waist from 65 cm to 74 cm

Cod. 1707/95 – M:
Waist from 75 cm to 84 cm

Cod. 1707/105 – L:
Waist from 85 cm to 94 cm

Cod. 1707/115 – XL:
Waist from 95 cm to 104 cm

Cod. 1707/125 – XXL:
Waist from 105 cm to 114 cm

See also: 1709 Belt with Chain

L'articolo 1709 Belt with Chain proviene da Isla Fit Canarias.

Set of PVC rings for suspension training with adjustable straps. PVC is an affordable alternative to wood. PVC rings have a standard 28 mm diameter. The texture is perfectly molded to reproduce the wood grain. PVC rings boast a good grip with a natural and pleasant touch providing a full suspension training system for bodyweight fitness. PVC rings facilitate improving the athlete’s upper body and core strength.

Dimensions: standard diameter 28 mm; internal Ø 180 mm
Straps length: 2 m

🇮🇹 Versione Italiana

L'articolo 2088 Pvc Ring proviene da Isla Fit Canarias.

Premium wooden rings for suspension training with adjustable numbered straps. Easy set-up. The wooden texture is medium polished to guarantee a perfect grip with or without chalk. The touch is natural and pleasant, which lead many athletes to prefer wooden rings. Gym ring training is a very versatile way to engage your muscles and core with exercises such as pullups, pushups, dips, and rows. Wooden rings provide a complete workout for all muscles of the upper body: chest, back, abdominals, biceps, triceps, shoulders, and forearms.
Wooden rings offer a traditional look and a superior gripping surface. Their heavy-duty straps with quick-lock/release buckles have a marked numbering system to ensure the correct length.

Dimensions: wooden ring standard diameter 32 mm; internal Ø 172 mm
Straps length: 280 cm

🇮🇹 Versione Italiana

L'articolo 2089 Wooden Ring diameter handle 32 mm proviene da Isla Fit Canarias.