The code OR1004 identifies a 50 mm diameter replacement rubber cap for spherical head tubes.

compatible with 9047 Pyramid Plate Rack e 9039 Standing Bumper Plate Rack

L'articolo OR1004 D50 Round Cap proviene da Isla Fit Canarias.

The plates in this line are entirely made from recycled rubber granules sourced from shoes. These are not bumper plates made with new vulcanized rubber merely coated with a layer of recycled granules, but plates fully composed of recycled rubber granules bonded together through high-temperature processing. For this reason, in order to achieve the target weight while maintaining the 450 mm diameter and an acceptable thickness, the 20 kg plate contains a small metal core inside.

The use of recycled rubber granules gives these plates their distinctive stone-like appearance, with color tones that may vary depending on the production batch. Additionally, the light base color, which tends toward white, may take on yellowish shades over time due to oxidation from exposure to light and environmental factors.

Crumb bumpers, also known as Grid or Hi-Temp bumper plates, have been produced for over twenty years. However, the growing focus on material recycling and advancements in manufacturing techniques have led to a renewed interest in this type of plate, now offering higher quality compared to earlier versions.

From a technical standpoint, modern Crumb Plates should not be confused with old models that were overly thick and excessively bouncy. The rubber used—bonded with polyurethane—is about 10% softer than that of standard training bumper plates, offering greater elasticity, slightly more bounce, and a quieter impact on the ground. The result is a less sharp and harsh floor contact, making for a more pleasant experience without excessive rebound.

Note: In the final stage of production, the plates are treated with silicone-based products. The silicone layer can be wiped off with a cloth or will naturally wear off with use over time.

• Inner hole diameter: 50 mm

• Total plate diameter: 450 mm

Available weights:

• Code 9040/7 – Bumper Plate 5 kg – Thickness: 32 mm

• Code 9042/7 – Bumper Plate 10 kg – Thickness: 59 mm

• Code 9044/7 – Bumper Plate 20 kg – Thickness: 76 mm

Weight/thickness tolerance: ± 3%.

L'articolo 9040/7-9044/7 Crumb Rubber Bumper Plate proviene da Isla Fit Canarias.

In order to comply with international standards concerning the chromatic recognizability of plates, it was then decided to proceed by painting the engraved graphics, which are also necessary for weight calibration, and implementing a colored silicone ring, placed in a special recess in the head of the plate. This solution guarantees immediate and perfect recognition of the weight.
Considering the aesthetically and technically relevant result, we were tempted to implement the engraving of the painted graphics on both sides. However, the choice of the single-sided disc, calibrated by material removal on one side only, stood out against the need for a maximally thin disc.
The removal of material on both sides would inevitably have resulted in the production of a disc with a slightly greater thickness. In this case, too, we preferred, albeit by a few mm, to favor the technical aspects.

Powerlifting Plates – Available weights:

9036/6 Plate kg 0,25 +/-1,5%    diameter 118 mm- thickness    5 mm – chromed
9037/6 Plate kg 0,5    +/-1,0%   diameter 138 mm – thickness   6 mm – chromed
9038/6 Plate kg 1,25 +/-1,0%    diameter 158 mm – thickness 10 mm – chromed
9039/6 Plate kg 2,5    +/-1,0%   diameter 208 mm- thickness 11 mm – chromed
9040/6 Plate kg 5       +/-0,5%   diameter 238 mm – thickness 17 mm – chromed + markers white
9042/6 Plate kg 10     +/-0,5%   diameter 318 mm – thickness 18 mm – chromed + markers green
9043/6 Plate kg 15     +/-0,5%   diameter 378 mm – thickness 19 mm – chromed + markers yellow
9044/6 Plate kg 20     +/-0,5%   diameter 450 mm – thickness 18 mm – chromed + marker blue
9046/6 Plate kg 25     +/-0,5%   diameter 450 mm – thickness 22 mm – chromed + markers red

See also:

• Code 9015 Powerlifting Barbell 32
• Code 9015/2 Competition Powerlift Bar 29mm

L'articolo 9036/6-9046/6 Powerlifting Plates proviene da Isla Fit Canarias.

Useful kit specially designed for the training legs, especially the glutes, through the execution of exercises in squatting with overload in deficit, in relation to the support of the feet.

The kit takes its name from the famous squat variation known as the Sumo, due to the split-legged posture reminiscent of sumotors. The Sumo squat is characterized by a very wide leg opening, well beyond the width of the shoulders, with the toes naturally over-extended. This results in less hip flexion and extension, typical of the standard squat, in favor of more abduction and adduction work. Consequently, on a muscular level, we have greater activation of the adductor muscles and of the gluteus. Gluteus whose activation and elongation will be greater the greater the depth of the squat. In order to obtain a full, maximally deep squat, using a weight in order to further stimulate the muscles, the technically simplest solution is to hold a weight in a natural way, with the load weighing downwards. The T-Bell 9011 represents, from this point of view, the simplest and safest solution, to be combined with the Mini Steps 0231/2 in order to be able to descend with the load itself below the foot support line.

The T-Bell Deficit Sumo Squat Kit 0231/3K represents for these reasons a practical solution for the training of the legs, in particular of the gluteus, through the execution of exercises in maximum squat (full squat), with weight, and in deficit with respect to the support plane of the feet; Deficit Sumo Squat and Straddle Lifts.

It is possible to add other pairs of steps 0231/1 to the kit to further raise the steps.

THE KIT INCLUDES:

• 9011 T-BELL HANDLE x1 (click here)
• 0231/2 – MINI AEROSTEP: x2pcs (click here)
• 0231/1 – PAIR OF AEROSTEP STEPS: x 2pcs (click here)

See also:

cod. 0230 AeroStep
cod. 0231 Easy Aerostep
cod. 0231/1 risers for aereostep
cod. 0231/2K Sumo Squat Kit 

Other steps sidea:

cod. 0239 Ecofit Step
cod. 0235 Premium Step 
cod. 0212W SiStep White

L'articolo 0231/3K Deficit Sumo Squat Kit + T-Bell Handle proviene da Isla Fit Canarias.

66 cm diameter disc, weight 30 kg, thickness 65 mm,  it combines the construction characteristics of the rubber bumper plates with the measurements of the metal wagon wheels. The aim is to get a large disc, able to lift the barbell off the ground more, without compromising on the mechanical qualities of rubber.
The 66 Rubber Wagon Wheels appear giant when compared to the regular bumper discs with a 45 cm diameter, however, their diameter determines a 10.5 cm increase in the barbell height from the ground, which is considered to be the standard height of the blocks.

These discs are thus extremely practical because they meet precise technical requirements for push-ups and hip thrusts, facilitating the loading/unloading of the barbell without the need to use lifts, lifting levers or supports. Lengthy set-up operations are often at the root of the difficulties in performing these exercises, especially when it comes to athletic training. The 66 Rubber Wagon Wheels make it possible to create a practical fixed workstation, especially if they are left mounted on the barbell.

L'articolo 9040/30W Rubber Wagon Wheel Bumper Plate proviene da Isla Fit Canarias.

The Competition Rubber Bumper Plate line was made to obtaining the highest quality standards for plates dedicated to competitions. The plates are color-coded according to IWF standards, and are available in the weights from 10 to 25 Kg. 5 Kg bumper plates are not included in this line because in weightlifting competitions are preferred fractional rubber plates for this weight, such as code 9038/50.

The rubber used for the Competition version has the discs equipped with a large steel plate diameter 185 mm to reinforce the central area, reduce the tolerance with the barbell and also reduce, the most important feature, the amount of rubber of which it is composed the disc.

Central compactness, precision insertion on the barbell, reduced thickness, low rebound effect: these are the main features that characterize the Competition Bumper Plate line.

Loading Hole diameter 50 mm
External diameter 450 mm

Available weights:

• cod. 9042/5 Bumper plate kg 10 – thickness 39 mm – Green
• cod. 9043/5 Bumper plate kg 15 – thickness 50 mm – Yellow
• cod. 9044/5 Bumper plate kg 20 – thickness 55 mm – Blue
• cod. 9046/5 Bumper plate kg 25 – thickness 67 mm – Red

Quick View

9015/9 Crossfit Olympic Barbell ®

€444.05 Tax Excluded

Quick View

9015/4 Premium Male Olympic Barbell

€262.15 Tax Excluded

Quick View

9015/5 Premium Female Olympic Barbell

€262.15 Tax Excluded

Quick View

9015 Powerlifting Barbell 32

€228.98 Tax Excluded

Quick View

9015/8 Male Olympic Barbell

€231.66 Tax Excluded

Quick View

9015/3 Training Barbell 185

€164.51 Tax Excluded

Quick View

9014 Training Barbell 140

€129.74 Tax Excluded

Quick View

9012 Olympic Hex Bar

€318.86 Tax Excluded

Quick View

9012/1 Super Hex Bar

€347.75 Tax Excluded

9016/2 Olympic Spin Collars Ø 50 mm

€159.43 Tax Excluded

9016 Spin Collars Ø 50 mm

€51.36 Tax Excluded

9016/1 Lock Collar – Pair of Collars Ø 50 mm

€12.84 Tax Excluded

9019 Steel Spring Collars Ø 50 mm

€8.56 Tax Excluded

🇮🇹 Versione Italiana

L'articolo 9042/5-9046/5 Competition Rubber Bumper Plates proviene da Isla Fit Canarias.

Black Rubber Bumper Plates are fully rubber weight plates, designed for weightlifting, powerlifting, and cross training, and therefore built to withstand repeated barbell drops to the floor (hence the name bumper, meaning shock absorber). To ensure evenly distributed support and a consistent bar height from the ground, all Bumper Plates are manufactured with the same external diameter, conventionally set at 45 cm according to various federation standards. Due to its mechanical properties, synthetic rubber is the most suitable material for this type of plate.

The high-quality rubber—virtually odorless, with an excellent elastic coefficient and solid mechanical strength—guarantees exceptional durability even with the inclusion of the steel ring.

The steel ring, which protects the central hole, is the most economical and widely used construction solution, though it has the downside of causing greater wear around the center of the plate over time. However, this is a minor drawback, as Black Rubber Bumper Plates successfully withstand over 20,000 drop tests.

150 kg Bumper Kit Contents:

• 2x code 9040/1 Bumper plate 5 kg – thickness 24 mm

• 2x code 9042/1 Bumper plate 10 kg – thickness 42 mm

• 2x code 9043/1 Bumper plate 15 kg – thickness 60 mm

• 2x code 9044/1 Bumper plate 20 kg – thickness 70 mm

• 2x code 9046/1 Bumper plate 25 kg – thickness 82 mm
  
  Weight tolerance: +/-5%

L'articolo 9040/1K150 Black Rubber Bumper 150 Kg Kit proviene da Isla Fit Canarias.

The Black Rubber Bumper Plates are fully rubber weight plates, designed for weightlifting, powerlifting, and cross training, and thus made to withstand barbell drops to the ground (hence the name “bumper”). To ensure evenly distributed support as well as a consistent bar height from the floor, all Bumper Plates are manufactured with the same external diameter, conventionally set at 45 cm according to various federation regulations. Due to its mechanical properties, synthetic rubber is the most suitable material for producing this type of plate.

The high-quality rubber—virtually odorless, with an excellent elastic coefficient and good mechanical resistance—ensures outstanding durability, even with the inclusion of a steel ring.

The steel ring, which protects the center hole, is in fact the most economical and commonly used construction solution, though it tends to wear the central part of the plate more quickly. This is a minor drawback, as the Black Rubber Bumper Plates successfully pass durability tests exceeding 20,000 drops.

100 kg Bumper Kit Contents:

• 2x code 9040/1 Bumper plate 5 kg – thickness 24 mm

• 2x code 9042/1 Bumper plate 10 kg – thickness 42 mm

• 2x code 9043/1 Bumper plate 15 kg – thickness 60 mm

• 2x code 9044/1 Bumper plate 20 kg – thickness 70 mm
  
  Weight tolerance: +/-5%

L'articolo 9040/1K100 Black Rubber Bumper 100 Kg Kit proviene da Isla Fit Canarias.

The Technique Hollow Plates are lightweight plates of 2,5 kg (red colored) and 5 kg (white colored) that, despite the reduced weight, have the same diameter of the standard weightlifting Bumper Plates and a very large hedge. This is possible thanks to the fact that these plates are made of high-density polyethylene which internally is completely empty (that is why they are called “Hollow”). The user can therefore have light weight plates with standard dimensions, which can be useful to firstly approach, or to improve, the weightlifting techniques (like clean, jerk, snatch or deadlift). That is why the Technique Hollow Plates are usually combined with the 3 kg Lightweight Intro Barbell (code 9015/1) or to the 7 kg Lightweight Aluminum Barbell (code 9014/1): in this way it is possible to use these plates on platforms or rubberized pavement as with normal bumper plates.
See also, alternatively, the thin hedge Technique Plates 2,5kg (code 9040/25).

DIMENSIONS: 450 mm, hole 50 mm
WEIGHTS AVAILABLE:
Code 9040/25H Technical Hollow Plates 2,5 kg (thk 60 mm, red colored)
Code 9040/50H Technical Hollow Plates 5 kg (thk 85 mm, white colored)

🇮🇹 Versione Italiana

L'articolo 9040/25h-9040/50h Technique Hollow Plates proviene da Isla Fit Canarias.

PU Plate with symmetrical handgrip. Weight plates with handles and internal rounded metal core ring for barbells with a diameter of 50 mm. The grips are comfortable and symmetrical, allowing you to use the plate also individually (without a barbell) for exercises with one or two hands.
Grips allow users to gain control and stability when lifting. The symmetrical handles facilitate athletes to perform a range of compound and isolated movements without a barbell.
Internal diameter 50 mm

Available weights:
cod. 9030 Symmetrical grip rubber plate. Black. Ø18 cm Kg 1,25 – thickness 25 mm
cod. 9031 Symmetrical grip rubber plate. Black. Ø21 cm Kg 2,50 – thickness 30 mm
cod. 9032 Symmetrical grip rubber plate. Black. Ø25 cm Kg 5,00 – thickness 30 mm
cod. 9033 Symmetrical grip rubber plate. Black. Ø30 cm Kg 10,0 – thickness 40 mm
cod. 9034 Symmetrical grip rubber plate. Black. Ø36 cm Kg 15,0 – thickness 45 mm
cod. 9035 Symmetrical grip rubber plate. Black. Ø40 cm Kg 20,0 – thickness 50 mm
cod. 9036 Symmetrical grip rubber plate. Black. Ø45 cm Kg 25,0 – thickness 50 mm

🇮🇹 Versione Italiana

L'articolo 9030-9036 PU Plate – PU Plates with Handles proviene da Isla Fit Canarias.